Difference between revisions of "Bucketeers Glossary"

From Shipbucket Wiki
Jump to: navigation, search
(Created page with "People who work in shipbucket scale, often get a lot of comments containing words not commonly found in the english language or even words meaning different things when applie...")
(No difference)

Revision as of 21:39, 10 September 2018

People who work in shipbucket scale, often get a lot of comments containing words not commonly found in the english language or even words meaning different things when applied to ships and ship design. This page is created by Acelanceloet to provide a reference for such words. This article will provide an explanation of words describing ships dimensions (both real and relative), ship shapes, ship stability etc. It is allowed and even encouraged to improve, add to and expand these explanations. Definitions too complicated to fit in a few sentences deserve their own articles in the future, which will be linked from this page.

Dimensions

Length over all
Abbreviated as LOA
The length from extreme bow to extreme stern of the hull of a ship.
Length on Waterline
Abbreviated as LWL
The length of a ship on the design waterline.
Length between perpendiculars
Abbreviated as LPP
The point where the bow of a ship enters the water when at design draft, fore end of the design waterline
Aft Perpendicular
Abbreviated as A.P.
Depending on the ships design, either
  • The aftmost side of the rudder post
  • The centerline of the rudder stock if there is no rudder post
ships with unusual stern shapes normally don't use the "perpendicular" description. If they do though, it either follows a 'rule length' or is the aft end of the design waterline.
Fore Perpendicular
Abbreviated as F.P.
The length of a ship between fore perpendicular and aft perpendicular
Beam
Abbreviated as B
The greatest width of a ship
Beam at waterline
Abbreviated as BWL
The greatest width of a ship at the design waterline.
Depth
Abbreviated as D
The distance between the top of the keel to the top of the deck beam at side of the uppermost continuous deck, measured amidships. (= 0,5*LWL)
Draft
Abbreviated as T
The greatest distance between keel and waterline at a load condition. If just the draft is given, this is design draft.
Draft over all
Abbreviated as TOA
The distance between the waterline and the lowest point of the ship.

Coefficients

--WIP --