there is one problem with al pegasus engined designs: the huge fan on the front. that is why the harrier can't go supersonic (allong with the fact it is missing afterburners) and it makes all designs with it rather unstealthy from any angle of which it is visible. that means you have to hide it from radar, and that means again an large overhaul. another idea if you want an VTOL: yak 43.
http://www.aviation.ru/Yak/Yak-43.jpg
http://www.afwing.com/intro/birdy/yak43f35.jpg
http://i38.tinypic.com/33x7oxx.jpg
not real, not stealthy (only reduced RCS) but an good fighter with VTOL capabilities (somewhat similar to an russian F-35B)
Yes, that would have been my next problem. Although (according to Bae/Hawker) their X-wing design would have been supersonic, but at what fuel rate...
If I'm not misstaken, Yakolev made another design for a STOVL fighter, similar to the Lockheed Martin JSF (they actually worked together, so LM could get their hands on STOVL technology from what I understood). It's smaller than the Yak-45, but was never developed beyond a concept, I think the design was in a special about X-planes from Air Forces Monthly a few years back.
It doesn't matter how stealthy your airframe is, if you hang bombs and missiles off of it you are going to have a good sized RCS, unless when you say "stealth features" you are thinking along the lines of the Super Hornet or the Rafale, and not a 5th gen fighter (F-22, PAK-FA, J-14, ect).
If you really want a STOVL fighter, and you don't want F-35s, then the next best option would probably be a westernized Yak-43 as Ace recommended.
Good point. I guess 'low-observable' (like the Super Hornet / Rafale / Gripen NG) would be better. Besides, if you're putting an amphibious landing ship in front of coast line (even if OTH) they know you're coming anyway...
I have made some modifications to the Sylphid, a larger wingspan (15,66 meters compared to the original 13,77 meters) as well as a larger wing surface area. I plan to do a proper drawing (pencil + graphpaper, don't shoot me, I can't draw with computers yet...) and further modifications will include lenghtening the rear fuselage (almost until the end of the engine nacells), different engine nozzles (the original ones look cool, but would be terrible for rotation in a STOVL aircraft), and of course the liftfan behind the cockpit. As the Sylph is already a much larger plane than the F-35 Lightning II that shouldn't be a big problem. I will have to add folding wing(tip)s because of the increased wingspan, but, if folded vertical tailplanes are also included, that would be no problem as well.
I do have a fifth generation (5.5 perhaps?) fighter idea for the carrier though, it's similar to the F-22 Raptor, but mixed with Sukhoi elements, and I assume the original design is Russian (probably a home made original design, instead of an official Sukhoi or Mikoyan design). I've found it on the web and call it the Saab JAS-45 "Draken II" (yes, very original, I know). I haven't gotten any specifications, but it's a big aircaft, larger than a Su-34 Flanker... If anyone knows more about it, please let me know!
I've also scaled back my "Dual-Tram" LHA design. It's still larger than a Ford class CVN at 358,2 meters with a 82,8 meter wide flightdeck, but no longer in the 500 meter range. Displacement would be somewhere in the 90,000 - 120,000 ton range (the original Dual-Tram would have been around 69,000 tons). I've kept it a little larger because of the larger aircraft, and the need to 'spot' the Karem OST. This size should be realistically enough. Especially with a little cheating. In my AU advances in metallurgy were discovered that made building larger ships easier. I still have to scale back the CVN and the MPF ship though.
This brings me to the next question. What missions are your NEU going to undertake that ships of that size are optimal for?
Well, besides regional conflicts, Nature... As we have seen in the last couple of years, due to the changes of the Global climate (for whatever reasons this may be happening) natural disasters (such as hurricanes) happen more often. A large ship capable of carrying a lot of helicopters, as well as Tiltrotor craft the size of a C-130 would be very usefull in providing disaster-relief.
For the landing craft I have chosen the LCU(R) planing design from Bell-Textron Marine Systems. Besides looking cooler than the ugly LCAC, it has a greater payload (three MBT's instead of one) and a longer range. My LHA design is capable of four at a time (they are longer than an LCAC) in her large well deck (108 meters x 37,8 meters).
Just a couple of links to add in the visual aspect:
- Yukikaze FFR-31 Sylph:
http://www.gearsonline.net/series/yukikaze/sylph/
- Karem Optimum Speed Tiltrotor:
http://karemaircraft.com/index-1.html
- Bell-Textron LCU(R) Planing Landing Craft:
http://web.archive.org/web/200611100941 ... asheet.pdf
- Sikorsky X2-JHL concept:
http://www.flightglobal.com/blogs/fligh ... X2_JHL.gif
- Dual-Tram line LHA design (which unfortunately lost to the improved Wasp-class):
http://www.globalsecurity.org/military/ ... m-line.gif
The specs of the ship (based on the line-art from a PDF) are as follows:
Length:
-Over all 282 meters (925 ft);
-Flightdeck: 274.8 meters (901.6 ft);
-Waterline: 265.2 meters (870 ft)
Beam: 66.6 meters (218.5 ft) flightdeck / 72 meters (236.2 ft) over aircraft elevators.
Draught: appr. 9.6 meters (31.5 ft)
JSF Runway length: appr. 140 meters (459.3 ft)
Dockingwell length: 92.4 meters (303 ft)
Hangar length: 92.4 meters (303 ft)
Hangar height: 7.2 meters (23.6 ft)
Hangar width: 36 meters (118 ft)
Elevator size: 14.4 meters x 15.6 meters (47.3 ft x 51.2 ft)