Moderator: Community Manager
[Post Reply] [*]  Page 1 of 5  [ 48 posts ]  Go to page 1 2 3 4 5 »
Author Message
Blackbuck
Post subject: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 9th, 2012, 8:29 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Rather than posting bits and pieces here and there in the AU FD thread I'm starting up this to post them all in a consolidated topic.

To start things off a substantial WIP of a late war bomber (at least an idea thereof).

The DeBelvoir Lilihelm is a four engined heavy bomber powered by four McMillan M1500B-2 16 cylinder V engines outputting around 2,350HP (takeoff power) each, they are fitted with multi-stage superchargers and capable of water injection. (The original design had the engines in a push pull configuration in two nacelles). The design has a crew of eight consisting of the pilot, co-pilot, bombardier/navigator, flight engineer, radio operator and three aerial gunners. The design calls for the aircraft to be able to carry a 9500kg payload 4500km. The design was the first in Atlantia to make use of remote control turrets and barbettes (the armament isn't shown yet). Proposed armament was to be two HS.404 20mm cannon in both the dorsal and ventral turrets and four ANM2/ANM3 .50 HMGs in the tail barbette. Other schemes were trialled and proposed including quad .50 dorsal turrets fore and aft as well as a forward ventral turret with two .50 weapons. Top speed at operating altitude is around 610km/h. A later proposed pair of variants were detailed with two M2500B-2 H-24 engines outputting 3,300HP each and another with four BW-1700B-2 18 cylinder sleeve valve radials.

[ img ]

~Regards, Mark.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Cascadia
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 9th, 2012, 10:33 pm
Offline
User avatar
Posts: 604
Joined: September 1st, 2010, 12:05 pm
Location: Germany
Interesting design. I have to say, that at least to me it looks as if someone put a british designed body and attached a german designed cockpit to it. Is that on purpose, or is that just my subjective impression?

_________________
My deviantart account
http://cascadiasb.deviantart.com/?rnrd=191663


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 9th, 2012, 10:50 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
It is indeed on purpose, I was remarking to a friend earlier my fondness for some of the German design philosophies.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Demon Lord Razgriz
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 9th, 2012, 11:23 pm
Offline
User avatar
Posts: 446
Joined: July 27th, 2010, 1:18 am
Location: Eastern North Carolina
If I may make a suggestion, I'd use a darker line where the outer wing meets the Engine pod. As it is now, it almost looks like it's angled straight up if not for the tip drawn.

_________________
95% of my drawings are destined for NS, 4.9% for fun, & .1% serious.
Worklist:
Space Shuttle
Atlas V
Delta II/III
Project Constellation
Soyuz series


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 10th, 2012, 1:23 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Updates to two the Mediums and something for Obsydian Shade.
[ img ]
[ img ]
[ img ]

Idea for a cruiser based loosely on British practice but integrating ideas lifted from a captured Panther. The 57mm has an auto-loader with a 20odd round magazine capable of firing at around 50 rounds a minute (cyclic).

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
nighthunter
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 10th, 2012, 5:51 pm
Offline
Posts: 1971
Joined: July 27th, 2010, 8:33 pm
I wonder what the Vickers 75mm L/50 HV Gun, would look like in the tanks

_________________
"It is better to type nothing and be assumed an ass, than to type something and remove all doubt." - Me


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 10th, 2012, 6:11 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Have you any pictorial reference of it? I can find plenty of descriptions of the thing but no imagery (or I'm just being very thick).

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
nighthunter
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 10th, 2012, 6:27 pm
Offline
Posts: 1971
Joined: July 27th, 2010, 8:33 pm
I have google'ed it twice, and only found the Vickers AA 75mm L/50

_________________
"It is better to type nothing and be assumed an ass, than to type something and remove all doubt." - Me


Top
[Profile] [Quote]
Hood
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 11th, 2012, 9:54 am
Offline
Posts: 7233
Joined: July 31st, 2010, 10:07 am
On the Lilihelm, I'd probably alter it a bit for more tail area, compare the tail with that of the Lincoln for instance. Also the nose glazing might look a little better with more curved supports, maybe more panels. Overall it looks quite good though.

_________________
Hood's Worklist
English Electric Canberra FD
Interwar RN Capital Ships
Super-Darings
Never-Were British Aircraft


Top
[Profile] [Quote]
eswube
Post subject: Re: Parliamentary Republic of Atlantia (FD) ProjectsPosted: July 11th, 2012, 1:47 pm
Offline
Posts: 10696
Joined: June 15th, 2011, 8:31 am
Very interesting drawings! :)
However I concur with Hood's worry about Lilihelm's tail area. I compared it with Lancaster and with similar overall size, the tail has an area of about 2/3-3/4.


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 5  [ 48 posts ]  Return to “FD Scale Drawings” | Go to page 1 2 3 4 5 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 29 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]