Moderator: Community Manager
[Post Reply] [*]  Page 1 of 1  [ 9 posts ] 
Author Message
phu2000
Post subject: Question about US-made director for 40mm and 3"/50 gunPosted: October 23rd, 2017, 6:41 pm
Offline
Posts: 41
Joined: March 20th, 2014, 11:25 am
Hello, while I was searching about the fire control system, I found something a bit confusing/lack of info :?: . That's the Mk51-family GFCS.

The questions are:

- I assume that any of 51/52/57/63 can control both 40mm and 3"/50 RF, is that correct?

- Is there any difference in capability between using Mk57 and Mk63 to control the Bofors/Mk33/34 gun? I mean it looks like their difference is just 57 installed the radar on the director and 63 installed the radar on the gun mount.

- Does the US Navy export the 57/63 during the late-40s/early-50s? Or just 51/52?

- When did AN/SPG-34 replace the old radar? And do they use it with the Mk63?

and another question that is not about the director, when did the enclosed Mk33 become available?


Top
[Profile] [Quote]
Colosseum
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: October 24th, 2017, 12:35 am
Offline
Posts: 5218
Joined: July 26th, 2010, 9:38 pm
Location: Austin, TX
Contact: Website
Hey I will try to answer a few if I can. This is a really obscure subject and even the big textbooks from Friedman don't cover it in much depth. Unfortunately I'm moving this week and all my books are packed away in boxes, so some of this is off the top of my head. I'll try to reconfirm later on and maybe provide page number references etc.
Quote:
- I assume that any of 51/52/57/63 can control both 40mm and 3"/50 RF, is that correct?
As I understand it, the Mark 52 was a stopgap designed for small units and the 3"/50 (non RF). The Mark 51 was a really basic director that could be adapted to control everything up to 5" guns. The Mark 57 was designed to be a radar-assisted version of the Mark 51, with four Mark 57 on BBs and CBs to help defend against saturation attacks. Mark 57 could control the 5" guns in a pinch, and I think it was modified postwar to control 3"/50 RFs. Mark 63 was only used to control 40mm Bofors quads (the twins were too small to mount the radar component) and the 3"/50 RF postwar.
Quote:
- Is there any difference in capability between using Mk57 and Mk63 to control the Bofors/Mk33/34 gun? I mean it looks like their difference is just 57 installed the radar on the director and 63 installed the radar on the gun mount.
From what I've read, Mark 63 wasn't particularly well liked by crews and the installations didn't last long postwar. The Mark 57 was a superior system. The radar marks on Mark 57 and Mark 63 were different (Mark 57 used radar Mark 34 and Mark 63 used radar Mark 28). I'm not sure of the performance differences between the radars, but I bet a lot of the issues encountered with Mark 63 were due to the separation between the director (calculating lead, height, and azimuth) and the radar (calculating range) on the mount. On-mount ranging radar lasted into the cold war with the GUNAR system on the 5"/54, but I'm not an expert on those systems (maybe a question for erik_t). Either way it doesn't seem to be a thing anymore so that probably answers that question.
Quote:
- Does the US Navy export the 57/63 during the late-40s/early-50s? Or just 51/52?
It wouldn't surprise me if the Mark 57 and Mark 63 systems were removed from export vessels before transfer, but I have no evidence to confirm one way or another.
Quote:
- When did AN/SPG-34 replace the old radar? And do they use it with the Mk63?
I am not sure about this but I bet Friedman's Naval Radar has the answer (my copy is packed away).
Quote:
and another question that is not about the director, when did the enclosed Mk33 become available?
If you mean the Mark 33 gun director system, the first of those directors were aboard the FARRAGUT class but they were the open-topped version which seems to be externally identical to the Mark 28 aboard the early cruisers. I'm not sure which class first received the enclosed Mark 33. It might be the GRIDLEY class but I'm just not sure at this time. If I can find out I'll update this post.

_________________
USN components, camouflage colors, & reference links (World War II only)


Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: October 24th, 2017, 12:52 am
Offline
User avatar
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact: Website
I know for sure that Hellenic Navy (real) had Fletchers with Mk63 (HS Velos museum ship has one for her three Mk27 3"/50). Perhaps other export Fletcher DDs in the same period (late 1950's) had them as well.


Top
[Profile] [Quote]
phu2000
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: October 30th, 2017, 4:59 pm
Offline
Posts: 41
Joined: March 20th, 2014, 11:25 am
Thank you very much, Colosseum, odysseus. :D

by Mk33, I intended to ask about the enclosed 3"/50 twin gun (w/o on-mount radar) I'm still quite confuse about the designation, but it's the one they use on landing ships as well as early JMSDF ships (if I remember correctly, it's called Mk33, right?).

to be honest, it's the first time I know about which director Farragut use :oops: , so thank you for the information too.


Top
[Profile] [Quote]
heuhen
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: October 30th, 2017, 6:05 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
On Oslo class they used the "egg" as fire-director (Dutch fire-director)(can't remember the name at the moment, are all work), when Oslo class was modernized it replaced the "egg" with Kongsberg MSI 90(U) (tracking and fire-control system)

Note: What was used before the 60's I don't know


Top
[Profile] [Quote]
reytuerto
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: November 3rd, 2017, 7:04 pm
Offline
User avatar
Posts: 1647
Joined: February 21st, 2015, 12:03 am
Hi, Heuhen: I think that the dutch egg was named VW-20 or -22. Cheers.


Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: November 3rd, 2017, 8:09 pm
Offline
User avatar
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact: Website
Signaal Μ-20/Μ-22 (early) and MW-22/24/25/27/28 (late), this is the famliy of the Dutch "egg". Derivative is the US Mk 92 FCS and the SPG-60.


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: November 3rd, 2017, 11:13 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
WM actually, not MW

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Question about US-made director for 40mm and 3"/50 gunPosted: November 3rd, 2017, 11:47 pm
Offline
User avatar
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact: Website
Always confuse these letters.


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 9 posts ]  Return to “Off Topic”

Jump to: 

Who is online

Users browsing this forum: No registered users and 19 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]