Moderator: Community Manager
[Post Reply] [*]  Page 1 of 3  [ 29 posts ]  Go to page 1 2 3 »
Author Message
Navybrat85
Post subject: Aegis FrigatePosted: March 27th, 2017, 10:46 am
Offline
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact: Website
Just stretching my drawing fingers here a bit. Inspiration taken from the F100 class, Americanized for US Navy use.

Obviously a work in progress, I know I need to add some more details like an anchor, and I think I will round that sharp corner at the intersection of the bow and keel.

[ img ]

_________________
World's Best Okayest Author and Artist


Top
[Profile] [Quote]
RegiaMarina1939
Post subject: Re: Aegis FrigatePosted: March 27th, 2017, 2:17 pm
Offline
Posts: 442
Joined: January 12th, 2016, 8:57 pm
Location: Wilmington, North Carolina
That's great and all but ships of this type don't normally use waterjets (which are mostly used on small craft and stealth ships) Otherwise, your mast is a little fragile-looking but this seems pretty good overall. Also, as you mentioned, that sharp curve in the bow needs to be rectified. She won't be very seaworthy with that kind of bow shape.

_________________
Best regards,

RegiaMarina1939


Top
[Profile] [Quote]
Navybrat85
Post subject: Re: Aegis FrigatePosted: March 27th, 2017, 2:57 pm
Offline
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact: Website
Normal screws or azipod then would be better?

_________________
World's Best Okayest Author and Artist


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Aegis FrigatePosted: March 27th, 2017, 5:15 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
There's no obvious reason not to stick with a conventional shafted layout. Fixipods or azipods could also work if required.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Aegis FrigatePosted: March 27th, 2017, 5:28 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
RegiaMarina1939 wrote: *
That's great and all but ships of this type don't normally use waterjets (which are mostly used on small craft and stealth ships) Otherwise, your mast is a little fragile-looking but this seems pretty good overall. Also, as you mentioned, that sharp curve in the bow needs to be rectified. She won't be very seaworthy with that kind of bow shape.
Waterjets have nothing to do with stealth (their big steering exhausts on the waterline are ever quite bad for it :P) but have a lot do with speed. Waterjets are inefficient in reverse, more vulnerable (due to the steering exhausts with an reverser on it) and inefficient at low speeds. However, they have a lot less trouble with cavitation, are very efficient at high speeds and do not stick out under the hull.

so, depending on the role of your vessel, waterjets might work or not work. there is also the AWJ-21 development that I myself think to be very promising. There are also some cases of frigates with both propellers and waterjets, so when the propellers lose efficiency due to cavitation, the waterjet kicks in.

long story short, look at what your ship is supposed to do. Does it have to go very fast or quite fast most of the time (like LCS), then waterjets are the option. Regular propellers are the best when you go for the role most modern warships seem to be doing right now, unless you have to change direction a lot at low speeds, when azimuths work best. Things like the AWJ-21 and fixed pod drives fit somewhere in between that spectrum.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
RegiaMarina1939
Post subject: Re: Aegis FrigatePosted: March 27th, 2017, 7:45 pm
Offline
Posts: 442
Joined: January 12th, 2016, 8:57 pm
Location: Wilmington, North Carolina
acelanceloet wrote: *
RegiaMarina1939 wrote: *
That's great and all but ships of this type don't normally use waterjets (which are mostly used on small craft and stealth ships) Otherwise, your mast is a little fragile-looking but this seems pretty good overall. Also, as you mentioned, that sharp curve in the bow needs to be rectified. She won't be very seaworthy with that kind of bow shape.
Waterjets have nothing to do with stealth (their big steering exhausts on the waterline are ever quite bad for it :P) but have a lot do with speed. Waterjets are inefficient in reverse, more vulnerable (due to the steering exhausts with an reverser on it) and inefficient at low speeds. However, they have a lot less trouble with cavitation, are very efficient at high speeds and do not stick out under the hull.

so, depending on the role of your vessel, waterjets might work or not work. there is also the AWJ-21 development that I myself think to be very promising. There are also some cases of frigates with both propellers and waterjets, so when the propellers lose efficiency due to cavitation, the waterjet kicks in.

long story short, look at what your ship is supposed to do. Does it have to go very fast or quite fast most of the time (like LCS), then waterjets are the option. Regular propellers are the best when you go for the role most modern warships seem to be doing right now, unless you have to change direction a lot at low speeds, when azimuths work best. Things like the AWJ-21 and fixed pod drives fit somewhere in between that spectrum.
I'm just saying I wasn't sure whether or not waterjets were a good bet for such a big ship. Since they are normally used on smaller craft.

It says right here in your document that a traditional frigate hull such as the one depicted here would not be able to effectively accommodate a waterjet system and the associated equipment without changing the hull form:

"Frigate sized surface combatants are almost exclusively optimised for propellers and, therefore, the impact upon the hullform design criteria will need to be determined to accommodate the AWJ-21TM geometry effectively"

_________________
Best regards,

RegiaMarina1939


Top
[Profile] [Quote]
Navybrat85
Post subject: Re: Aegis FrigatePosted: March 29th, 2017, 2:28 am
Offline
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact: Website
[ img ]

Made a few changes. Topside, changed the upper superstructure and electronics. Changed the bow, curving the intersection of keel and bow, and sweeping the bow slightly forward (the original bow line looked a bit odd to me. *Shrug*) changed propulsion to shafts and screws, with rudder. I played around a bit with sonar but left it the way it was.

Added a single SH-60 on the flight deck. I added a generator exhaust above the hangar, and a 25mm Remote Weapon Station.

_________________
World's Best Okayest Author and Artist


Top
[Profile] [Quote]
RegiaMarina1939
Post subject: Re: Aegis FrigatePosted: March 29th, 2017, 10:54 am
Offline
Posts: 442
Joined: January 12th, 2016, 8:57 pm
Location: Wilmington, North Carolina
I think it looks much better than it did, and more seaworthy and practical. Good work.

_________________
Best regards,

RegiaMarina1939


Top
[Profile] [Quote]
Navybrat85
Post subject: Re: Aegis FrigatePosted: March 29th, 2017, 11:22 am
Offline
Posts: 489
Joined: July 27th, 2010, 1:47 am
Location: In the study, with the Candlestick
Contact: Website
Thank you!

_________________
World's Best Okayest Author and Artist


Top
[Profile] [Quote]
Hexelarity
Post subject: Re: Aegis FrigatePosted: March 29th, 2017, 6:07 pm
Offline
User avatar
Posts: 146
Joined: January 17th, 2016, 8:14 am
Location: Washington state
Honestly i thought the Water jet was fine, there are some large ships that use the water jet, honestly, there is no problem with a large or medium sized ship using waterjets. But then again its your art and you can do what you want :)

_________________
Wansui!


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 3  [ 29 posts ]  Return to “Personal Designs” | Go to page 1 2 3 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 6 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]