Shipbucket

I will post here all newdrawn enforcer never builds. references (especially lengths and sideviews) are welcome.
first of all, the 24000, the last LHD of this line (the concepts for the johan de witt, LHD 17000, 24000 and 30000)

comments?

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

There's a double line under the crane and along the top of the vehicle ramp, the platform supports on the masts would look a lot better in three pixel with, there's no shading under the platforms and the stairs aft could use some attention. Right now they look curved.
The cut outs in the hull could do with some heavier shading, and there should also be shaded under the anchor.
There's a gap in the waterline between the aft mast and the RHIB.
Unless the ship is riveted together, we normally don't show panel lines.
The Detailing on the ramp could do with some more contrast, right now it looks like JPEG artefacts unless you zoom in on it.

_________________
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.

nothing to do about it, as these parts should be on exact those positions.... I disagree that's because they aren't that much wider then the mast, but I could add a little shading there.... but only a little. I agreeno need for it in the cutouts, but I will fix the anchorwill fix the ship looked very empty without them, and recently some ships have them added... (like Miho's LCF) so I thought it would be ok....... but I can remove them if needed, can an admin please make clear if that should be done? will fix, but couldn't you have said that earlier? I have to fix it on 5 ships now already -.-

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

all ships of the enforcer series that needed fixes:
any other comments?
most likely I will post the LPD 15000 tonight.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

I'd raise the crane instead of lowering it, so that it doesn't merge with the superstructure.
The shading is of course up to you, but on my monitor at least, I can hardly see it unless I zoom in on it.

As for the ramp, I haven't really looked all that much on this thread since I don't like the Enforcer designs.

_________________
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.

The Enforcer 11000 LPD design still lacking some MINOR details (bridge level details, island, ect...)

there still need to be added some lights on it, otherwise it is finished IMO.... island?

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

The LPD misses a lot of details.
Look at the Rotterdam/JDW for the details.
You can not miss them!

_________________
Fryssian AU with Lt.Maverick 114
viewtopic.php?f=14&t=9802&p=193331#p193331

Embarked on: HNLMS Karel Doorman A833
To do list:
-Zeven Provincien class cruiser
-Joint support ship all sides
-F124 Sachsen class frigate
-F125 Baden-Württemberg class frigate
-Clemencau class aircraft carrier
-Zeven provincien class frigate
-Poolster class AOR
-Amsterdam class AOR
-Minas Gerais aircraft carrier

details like what? this ship isn't one of those, so I cannot say it will have exactly the same....

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin