Moderator: Community Manager
[Post Reply] [*]  Page 13 of 15  [ 149 posts ]  Go to page « 111 12 13 14 15 »
Author Message
acelanceloet
Post subject: Re: Blackbuck's Designs (Non Atlantia AU)Posted: November 4th, 2013, 3:40 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
heuhen wrote:
that 5"...
was an real proposal, hence why it is in the parts sheets (although I cannot remember where exactly it was posted on the forums)

I have a few remarks, questions and praises :P
first of all, I'd like to see the STIR fitted version too. note that with STIR 180 this ship would not have been able to handle the SM-2...... but I am not certain she can with SEAFAR. with STIR 240 and an SPS-49 she is able though, that is for certain, giving her the capabilities of an modernised perry.

keep in mind that your hangar, without the aft VLS, will be larger then that of the real life burkes. if you would not require that space, I would recommend it be used to bring the TT's a deck lower and give them reloads, so the ships ASW capabilities increase (also similar to perry, if she has an towed array that is)

in effect, DDV-1 is very much an perry powerplant in an burke hull, and was always meant to be the low end study. in speed and acceleration your ship is going to suffer compared to burkes, but on the other hand the range will go up and the price go down. the hangar brings her abilities up, and so does the SM-2 (if you can indeed field it) but it is still very much an frigate in an destroyer hull. she looks a bit bow heavy, but less then the actual DDV-1.

all in all, to me, it looks like an realistic and capable ship.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Blackbuck's Designs (Non Atlantia AU)Posted: November 4th, 2013, 4:13 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
acelanceloet wrote:
heuhen wrote:
that 5"...
was an real proposal, hence why it is in the parts sheets (although I cannot remember where exactly it was posted on the forums)

I have a few remarks, questions and praises :P
first of all, I'd like to see the STIR fitted version too. note that with STIR 180 this ship would not have been able to handle the SM-2...... but I am not certain she can with SEAFAR. with STIR 240 and an SPS-49 she is able though, that is for certain, giving her the capabilities of an modernised perry.

keep in mind that your hangar, without the aft VLS, will be larger then that of the real life burkes. if you would not require that space, I would recommend it be used to bring the TT's a deck lower and give them reloads, so the ships ASW capabilities increase (also similar to perry, if she has an towed array that is)

in effect, DDV-1 is very much an perry powerplant in an burke hull, and was always meant to be the low end study. in speed and acceleration your ship is going to suffer compared to burkes, but on the other hand the range will go up and the price go down. the hangar brings her abilities up, and so does the SM-2 (if you can indeed field it) but it is still very much an frigate in an destroyer hull. she looks a bit bow heavy, but less then the actual DDV-1.

all in all, to me, it looks like an realistic and capable ship.
  • Re: STIR 180 and SM-2, that I am aware of, they would have been fitted out to an austere capability with just a Mk29 on a plate over the area the Mk41 was to be fitted into.
  • Re: CEAFAR/CEAMOUNT, I thought the whole point of the pair was that they were scalable to other platforms than the ANZACs that only employ ESSM, as such I'd have thought the illuminators would have been enlarged and use more powerful transmitters? (Hence the larger faces on the tower compared to the existing CEAMOUNT faces)
  • Re: Powerplant, could that not be at least slightly aleviated with the introduction of better gearing and higher output LM2500s? Namely the +G4 compared to the original ones?
  • Re: Hangar and torpedos, Considering the aft engine/machine space doesn't *appear* to be as heavily engaged as a fully engined vessel could the tubes not come down below main deck level to the same height as the heli-pad and feed from shared stores that way?
Thanks for the nod to plausibility :)


ETA: updated original post with alternatives and pre-refits

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: Blackbuck's Designs (Non Atlantia AU)Posted: November 4th, 2013, 5:22 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
so the ship would have been an true fitted for but not with vessel? she seems to be huge for an vessel designed with no VLS at all.
while the powerplant would indeed be slightly eliviated, it would not double or increase 50% of the output IIRC. (should look that up but no time at the moment) and that would be what would be required to get it near burke level of prestations.
of course there are other options with that TT's, but if your hangar is oversized this is an quite easy one, that is what I meant with that ;)

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Blackbuck's Designs (Non Atlantia AU)Posted: November 4th, 2013, 5:39 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Correct, perhaps a path I could go down that I hadn't considered is maybe outfit them with a Mk.48 solution as opposed to the Mk.29s, would mean I could utilize some of the excess hangar space with an aft placed Mk.48 then fit the Mk.41 into its void when they get the refit that they deserve.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Blackbuck
Post subject: Tol Galan A Class CVGPosted: February 21st, 2014, 11:06 am
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Abstract:
The A class aircraft carriers are the largest surface combatants in use in Galenic navy. They are replacements for the preceding 'Z' Class of carriers (Improved Forrestal / JFK) built between 1960 and1965) - (TGL Zealous, Zephyr, Zodiac and Zulu).
Compared to their predecessors they have much reduced manning requirements but as would be expected from the disparity in size they also however embark fewer aircraft than them. They do however fulfil a whole gamut of roles other than the traditional carrier role. They have extensive command and medical facilities allowing them to as needed serve as amphibious flagships. They can if the need arises also be converted into commando carriers as the preceding 'Y' class were.
They are expected to be in service until around 2050 if not longer.

[ img ]

Specifications:

'A' Class Guided Missile Aircraft Carrier
  • Produced:2005-2014
  • In Commission: 2012 Onwards
  • Displacement: <85,000 Tonnes Full Load
  • Length: 272m WL
  • Beam: 45.3m (WL) - 75m (FD) (6.00:1)
  • Draught: 9.75m nominal
  • Propulsion: (~107MW to full speed ~36MW to 20kt Cruise ~12MW per EMCAT at full power)
    • 4x MT30 turbines (36MW ea.) as IEP
    • 4x MT7 based ship service generators (5MW ea.)
    • 6x MTU 12V4000 distributed generator sets for emergency power
  • Speed: Cruise:20 knots Sustained: ±28 knots
  • Complement and Accommodation: Crew: 700 + Aircrew Permanent Accommodation: 1750 Sealift 250 Troops + equipment
  • Endurance: 60 days before resupply
  • Range: 20,000km @ 20 knots
  • Armament:
    • 1x 64 cell strike length Mk41 [ESSM - ALASM(S) - SM-2MR + ER]
    • 4x Mk49 launchers for RIM-116
    • 4x Mk38 mounts retrofitted with Mk44 (30mm x173) cannon
    • 4x Mini-Typhoon mounts for M3M (12.7mm) HMGs
    • 2x Centurion dispensers for soft and hard kill countermeasures as well as short range SSMs as required
    • 2x Typhoon MLS-NLOS launchers for Spike-NLOS
    Flight Deck Arrangement:
    Catapult Set-up: 2x 90m EMCATs (One in the waist position and one on the bow on the starboard side) (~12MW Requirements each at full power)
    Deck Parking: Parking spaces for 16x F/A-18E/F sized aircraft whilst allowing flight ops to continue
    Elevators: 2x lifts capable of elevating two F/A-18E/F sized aircraft at a time and 3x weapon / stores lifts
    Arresting gear: 3-wire arrangement with net barricade

    ~7,808m^2 Hangar Area

    Aviation:
    [Currently]
  • 24x F/A-18C+ (FGR)
  • 12x F/A-18D+ (FRS)
  • 4x Merlin (ASW + ASuW)
  • 4x Lynx (ASuW + SAR)
  • 3x E-1T (AEW)
  • 2x KC-2T (COD + IFR)
  • 3x S-2T (ASW + ASuW)
  • 2x EC-1T (ELINT)
    [OR]
  • 16x F/A-18E (FGR)
  • 12x F/A-18F (FRS)
  • 4x E/A-18G (EW + DEAD/SEAD)
  • 4x Merlin (ASW + ASuW)
  • 4x Lynx (ASuW + SAR)
  • 3x E-1T (AEW)
  • 2x KC-2T (COD + IFR)
  • 3x S-2T (ASW + ASuW)
  • 2x EC-1T (ELINT)
    [OR]
  • 12x F-35C (GR)
  • 8x F/A-18E (FGR)
  • 8x F/A-18F (FRS)
  • 4x E/A-18G (EW + DEAD/SEAD)
  • 4x Merlin (ASW + ASuW + SAR)
  • 2x E-2D (AEW + CEC)
  • 3x KV-22 (COD + IFR)
  • 2x EV-22 (C2ISR + ELINT)

    Boats and Landing Craft:
    • 4x 9m RHIBs for harbour launch duties, search and rescue as well as boarding work
    Provisional sensor set-up as follows...
    • CEA CEAMOUNT CW Illuminator (4x)
    • BAE S1850M VSR
    • BAE Sampson MFR
    • SPN-753 + 730 Nav sets
    • Selex SASS EO/IR surveillance mounts (2 of)
    • Various patch antennas covering various parts of the HF/VHF/UHF spectrum
    • Various SATCOM domes for secure voice, LINK-16/22 etc in the UHF/SHF/EHF spectrum
    • Selex ILS system
    Other points of interest...
    • Several RHIBs of varying sizes for SAR and utility work
    • Reduced manning through heightened automation
    • IFEP
    • Has taken at least 5 attempts to get to this point
Regards, Mark.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Last edited by Blackbuck on June 21st, 2014, 9:37 pm, edited 5 times in total.

Top
[Profile] [Quote]
denodon
Post subject: Re: Non Atlantian Designs and Musings...Posted: February 21st, 2014, 1:02 pm
Offline
User avatar
Posts: 803
Joined: July 9th, 2011, 2:45 am
Location: Victoria, Australia
Contact: Website, YouTube
Very nice drawing indeed, even if I know nothing about modern ships.
That yellow crane on deck for some reason I find rather amusing, standing out amongst all the greys and blues.

_________________
"The first rule is not to lose; The second rule is not to forget the first rule"


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Non Atlantian Designs and Musings...Posted: June 21st, 2014, 7:43 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
First of all. I've updated the CVG in the previous post relative to research into.... Things...

Secondly, something I've been toying about with for part of something else.

[ img ]

Based off of the existing Enforcer 17000 LHD "Prince Edward" an LPH of aforementioned Enforcer with the following modifications.
  • Well dock deleted and replaced with extra tankage, berthing and specialist facilities
  • Superstructure modified to accept a pair of Millennium CIWS, SATCOM tower and a pair of Centurion decoy launchers
  • Main mast modified for new sensor fit
In keeping with the AU to which it belongs I've tried to keep US systems either absent or to a minimum.
The vessel in service is unique being supported by an Enforcer 17000 LPD (Johan de Witt) and three (usually one) JSS (Karel Doorman)

At some point there will be more to come. Right now I'm concentrating on other things.

~Mark.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
eswube
Post subject: Re: Non Atlantian Designs and Musings...Posted: June 21st, 2014, 8:02 pm
Offline
Posts: 10696
Joined: June 15th, 2011, 8:31 am
Great to see new stuff here. Well done. :)


Top
[Profile] [Quote]
Trojan
Post subject: Re: Non Atlantian Designs and Musings...Posted: June 21st, 2014, 9:28 pm
Offline
User avatar
Posts: 1216
Joined: March 26th, 2012, 4:29 am
Location: Big House
^ Seconded. Excellent carrier too.

_________________
Projects:
Zealandia AU
John Company AU
References and feedback is always welcome!


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: Non Atlantian Designs and Musings...Posted: June 22nd, 2014, 4:20 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Thanks for the kind words gents :)

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 13 of 15  [ 149 posts ]  Return to “Personal Designs” | Go to page « 111 12 13 14 15 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 6 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]