Moderator: Community Manager
[Post Reply] [*]  Page 6 of 10  [ 92 posts ]  Go to page « 14 5 6 7 810 »
Author Message
acelanceloet
Post subject: Re: American FrigatePosted: January 31st, 2014, 4:36 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
if I look at the distribution of weight (at least in height direction)
you have an similarly sized gun, lower in the ship
you have somewhat heavier radars, but about the same in CoG height
you have an VLS battery on the same position as the Mk 13
you have 2 helicopters as well on the main deck
you have an heavier powerplant
you have an heavier sonar

so all in all, it seems like your CoG will be lower, not higher.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Karle94
Post subject: Re: American FrigatePosted: January 31st, 2014, 4:40 pm
Offline
User avatar
Posts: 2129
Joined: November 8th, 2010, 3:07 pm
Location: Norseland
If I increase the height of the forecastle and the superstructure, would that solve the cog dilemma?


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: American FrigatePosted: January 31st, 2014, 4:43 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
enlarging/heightening the superstructure would help, or lowering the relative large beam (by increasing length and/or draft) or enlarging the radar suite.
without full calculations I cannot really say how it would end up, but just keep in mind the center of gravity should be higher then on the perry, and the higher you add weight, the better it is. you have to reason a bit, if you enlarge the beam you enlarge the displacement and with that the total weight of the ship, and that should go somewhere :P

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Karle94
Post subject: Re: American FrigatePosted: January 31st, 2014, 5:09 pm
Offline
User avatar
Posts: 2129
Joined: November 8th, 2010, 3:07 pm
Location: Norseland
So I have increased the draft with 4 pixels, made the hangar 4 pixels taller, increased the height of the forward part (foc'sle) with 6 pixels, made the bridge 10 pixels taller and increased the length by 22 pixels. I hope that helps.


Top
[Profile] [Quote]
RP1
Post subject: Re: American FrigatePosted: January 31st, 2014, 5:23 pm
Offline
User avatar
Posts: 208
Joined: July 27th, 2010, 8:48 pm
Location: Engerlands
Contact: Website
I'd note that FFG-7 had an aluminium superstructure. Aluminium is still used on warships but only for non-structural elements such as funnels and masts. This change alone would raise the VCG a bit.

RP1

_________________
"Yes siree, the excitement never stops." Togusa, Ghost in the Shell


Top
[Profile] [Quote]
acelanceloet
Post subject: Re: American FrigatePosted: January 31st, 2014, 5:26 pm
Offline
User avatar
Posts: 7510
Joined: July 28th, 2010, 12:25 pm
Location: the netherlands
along with the steel superstructure RP1 mentions, that should do the trick quite nicely, I think. it is looking about right now, I think.

on a sidenote, great to see you contributing a lot more, RP1!

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin


Top
[Profile] [Quote]
Karle94
Post subject: Re: American FrigatePosted: January 31st, 2014, 6:41 pm
Offline
User avatar
Posts: 2129
Joined: November 8th, 2010, 3:07 pm
Location: Norseland
I don`t suppose I should redesign the bridge to look better?


Top
[Profile] [Quote]
Colombamike
Post subject: Re: American FrigatePosted: January 31st, 2014, 8:44 pm
Offline
User avatar
Posts: 1359
Joined: July 27th, 2010, 6:18 am
Location: France, Marseille
A further round of idea's

Forget the Perry FFG size/requirement (early 1970's era !)
Think late 2010's/late 2050's era !!!!!!!!!!!!!!!

US ship-designer "Gibbs and Cox" International Frigate - late 1990's/early 2000's design (a mini Burke)
With 1 x 5" gun, 1 x CIWS RAM, 8 SSM, 32 VLS, hangar for helico, AEGIS, 2 directors & so
[ img ]
(lovely to see a much more updated/recent version with a 57 or 76mm gun, a CIWS (laser or RAM), 32 VLS forward, maybe 8 or 16 VLS amidships ? & a full integrated mast (without SPG-62 director's).
Heuhen,
[ img ]
Karle,
[ img ]


Top
[Profile] [Quote]
Thiel
Post subject: Re: American FrigatePosted: January 31st, 2014, 8:55 pm
Offline
User avatar
Posts: 5376
Joined: July 27th, 2010, 3:02 am
Location: Aalborg, Denmark
Again the hate on cannister launchers. Why?

_________________
“Close” only counts with horseshoes, hand grenades, and tactical nuclear weapons.
That which does not kill me has made a grave tactical error

Worklist

Source Materiel is always welcome.


Top
[Profile] [Quote]
MihoshiK
Post subject: Re: American FrigatePosted: January 31st, 2014, 9:02 pm
Offline
User avatar
Posts: 1035
Joined: October 16th, 2010, 11:06 pm
Location: In orbit, watching you draw.
Contact: Website
Thiel wrote:
Again the hate on cannister launchers. Why?
It's an irrational hate. He doesn't need an explanation. I mean, he wants to use VLS Harpoon in a future warship, when the USN is already firing LRASM (Long Range Anti-Ship Missile) test shots...

_________________
Would you please not eat my gun...
[ img ]


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 6 of 10  [ 92 posts ]  Return to “Personal Designs” | Go to page « 14 5 6 7 810 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 0 guests


The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]