Shipbucket
http://67.205.157.234/forums/

WLs40, WLs50, Luxtorpeda
http://67.205.157.234/forums/viewtopic.php?f=27&t=10198		 Page 1 of 1
Author:  Blue_Funnel [ March 24th, 2021, 2:23 pm ]
Post subject:  WLs40, WLs50, Luxtorpeda
Some types of WLs40 and WLs50
[ img ]
Luxtorpeda
[ img ]
Author:  eswube [ March 24th, 2021, 10:18 pm ]
Post subject:  Re: WLs40, WLs50, Luxtorpeda
I'm afraid that both these drawings also have some issues.

WLs40/WLs50 - just 1 pixel difference with correct size (95 vs. 96 px from 4,35 m x 22,093 = 96,1), but details could be improved, wheels look octagona and look like they are "in front" (from viewer's perspective) of the locomotive's external contour.

(see: Bogdan Pokropiński, Lokomotywy spalinowe produkcji polskiej, Wydawnictwa Komunikacji i Łączności, Warszawa 2009, p. 148)


Luxtorpeda - First of all, these probably should be on two separate sheets, since in PKP this name was also used as generic name for other streamlined motor units, but not for the original VT63's used by Austrian railways themselves. But more importantly, I believe that their shape (esp. near the engineer's cabin) is not represented correctly, not least because they are too tall (original austrian ones were 2,64 m high - that gives 58 pixels - and You have 72), buffers on Polish ones were IMHO of different shape (btw. is that thing on the right end a snow plough?) and generally the differences between original austrian and license-built polish sets were bigger than Your drawing suggests.

(see: Bogdan Pokropiński, Lux-torpeda PKP, Wydawnictwa Komunikacji i Łączności, Warszawa 2007;
Robert Kroma, Janusz Sosiński, Krzysztof Zintel, Normalnotorowe wagony silnikowe PKP 1919-1939, Kolpress, Poznań 2011)
Author:  Blue_Funnel [ June 20th, 2021, 1:00 pm ]
Post subject:  Re: WLs40, WLs50, Luxtorpeda
Improved version of WLs40.
[ img ]
Author:  eswube [ June 20th, 2021, 1:12 pm ]
Post subject:  Re: WLs40, WLs50, Luxtorpeda
Better, but IMHO still not quite there: for example wheels still look like if they were "outside" (in front of) the "engine floor" (not the actual name of it - that part marked by horizontal red line on most of Your drawings).

[ img ]
Author:  Blue_Funnel [ June 21st, 2021, 1:56 pm ]
Post subject:  Re: WLs40, WLs50, Luxtorpeda
[ img ]
Author:  eswube [ June 23rd, 2021, 7:48 pm ]
Post subject:  Re: WLs40, WLs50, Luxtorpeda
I don't think it's matching the drawing - also height-wise. Of course it can be wrong, just saying.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/