Shipbucket http://67.205.157.234/forums/ |
|
Enforcer-class Frigate http://67.205.157.234/forums/viewtopic.php?f=18&t=5672 |
Page 1 of 2 |
Author: | Valdiu [ October 27th, 2014, 4:26 am ] |
Post subject: | Enforcer-class Frigate |
Hallo! Recent NS convert over here, and to start off, I thought I'd share something that's been in the works for a few weeks or so. This is my fourth attempt and is by far the most realistic out of them all. Basically, it's job is to carry missiles - 128 of them in 2 Mk. 41s. NS's Warships Mk. II thread has been very helpful, but I'd like to see what you guys think. I do plan to replace the 40's hand-cranked Bofors with some mechanized ones, just need to hop over to the other computer and do that tomorrow. Anyways, armament:
Also, where can I find an F-15S/MTD drawing? Or at least an F-15E? Or are there not any? Thanks! |
Author: | TimothyC [ October 27th, 2014, 4:56 am ] |
Post subject: | Re: Enforcer-class Frigate |
I can dig up a Strike Eagle tomorrow, but the first thing I suggest is that you place it on a Shipbucket template, with a proper credit line. |
Author: | Thiel [ October 27th, 2014, 7:29 am ] |
Post subject: | Re: Enforcer-class Frigate |
It's not terrrible, but there is a long way to go. I suggest you draw a basic sketch of the topview to help you with the geometry because you've got quite a few impossible angles. Welcome to the board. |
Author: | Valdiu [ October 29th, 2014, 6:05 am ] |
Post subject: | Re: Enforcer-class Frigate |
I did it the best I could with Windows Vista paint, is this good or do I have to redo it on 7? I also did the topview in class today and saw nothing, can you point a few out for me? Thanks! |
Author: | Judah14 [ October 29th, 2014, 6:47 am ] |
Post subject: | Re: Enforcer-class Frigate |
The placement of the SPY-1 radars is wrong, that angle is impossible (or impractical). See this example installation: |
Author: | Valdiu [ October 30th, 2014, 10:33 pm ] |
Post subject: | Re: Enforcer-class Frigate |
So here's what I did quickly: Where should I place them? |
Author: | heuhen [ October 30th, 2014, 10:51 pm ] |
Post subject: | Re: Enforcer-class Frigate |
if no one explain it to you, I'll show it to you tomorrow, my time. Have to go to bed, long work day tomorrow. But I can give you one example (that other people can use to explain things with): Shipbucket have some drawings rule, one of them is that if a surface is angled from you'r perspective, it should be marked with a very dark grey color, and the surface with a color darker than the original grey used. The drawing above show that on multiple ways (It doesn't mean you have to draw like that drawing, it's a little to advance to go for that level of detail, this early, but later when you have learned all tricks in paint.) (the Drawing above is drawn in paint) |
Author: | JSB [ October 31st, 2014, 8:07 am ] | |
Post subject: | Re: Enforcer-class Frigate | |
So here's what I did quickly:
At the moment you have a square box without the indents (they would be lighter at bow facing or darker stern facing) this gives you side radar only.Where should I place them? JSB |
Author: | pegasus206 [ October 31st, 2014, 9:58 am ] |
Post subject: | Re: Enforcer-class Frigate |
I was so free to use your own drawing to let you see what JSB,Heuhen and Judah14 try to explain to you . By using the light and darker dhade it looks more natural , and you can see they are placed in a diferens angle . P.S. personaly i would place them higher more like heuhen and Judah have done than it have a beter range. |
Author: | Valdiu [ November 2nd, 2014, 5:36 am ] |
Post subject: | Re: Enforcer-class Frigate |
So, I heeded your advice; many thanks. I came up with this, is this better? Oh, and to that end, are large-caliber rail-mounted railguns feasible for emergency coastal defense? As in, in case of war or a giant freaking battleship, the railgun is taken from its shed onto the national circumference railway and pulled out to the site of the 'disturbance'? |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |