Novice wrote: * | March 24th, 2020, 9:56 pm |
Welcome aboard, and this is nice looking at someone doing a merchant ship as a first go (even if you had to go and arm them...).
Thanks! I wasn't going to arm them, but it seemed fitting on the camouflaged troopship one. After having spent so much time drawing them I didn't want to see them end like poor Lusitania.
Novice wrote: * | March 24th, 2020, 9:56 pm |
One is the bridge structure which looks too modern, it doesn't have any noticeable bridge wings.
I tried to draw it with those enclosed bridge wing cabins that some White Star liners had. I'll try switching it out for an open bridge wing to see if that looks better.
Novice wrote: * | March 24th, 2020, 9:56 pm |
Second are the masts, as they look like they are on the side of ship and not in centre. It comes from the fact that the structure end in front and starts again aft of them. Also the derricks on the fore and after most masts look too short.
Maybe leaving more of a gap between the superstructure islands would help show that the masts are in the centre, or perhaps the other way round by making the gap smaller so they partially cover the masts? The derricks did give me quite a bit of trouble, mostly because I haven't been able to find much in terms of reference pictures. I figured they shouldn't be much longer than they are because of where the hatches would be (the ones in the well decks aren't visible, the one on the forecastle is), I guess if they need to be longer they'd have to keep them at a higher angle to lower cargo into the hold?
Novice wrote: * | March 24th, 2020, 9:56 pm |
Style wise there is complete lack of shading on those drawings, apart from a darker patch on the aft side of the funnels.
Are you referring to the hull? I thought I'd done an okay job on the superstructure (masts, vents, lifeboats, promenade overhang, etc), did I not do it right? I'm not sure how to do it on the hull, especially towards the stern, but I'll give it a go.
Novice wrote: * | March 24th, 2020, 9:56 pm |
Also the portholes look too large, especially when as of late most of us are doing the 3X3 size portholes.
3x3 as in one blue pixel with a black one above, below and to each side? I'll try replacing them and seeing how that looks.
Many thanks for the feedback.