Shipbucket

the displacement seems to be a bit on the low side for the sizes given and an draft of about 12 meters, judging from the drawing.

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

The draft is actually about 9 meters and the weight i gave is just temporary because i wasnt too sure about but after looking for information about similar ships i think im going to take it up to 35.000 tons

_________________
kike-92

Ise class battleship (post-refit):

Displacement: 35,800 tons (standard); 40,169 tons (laden)
Length: 215.8 m
Beam: 31.75 m
Draught: 9.15 m
Propulsion:

Eight oil-fired Kampon boilers
80,000 shaft horsepower (60 MW)
Speed: 25.3 knots (46.9 km/h)
Range: bunkerage: 5,113 tons fuel oil
Complement: 1,370


No one noticed that the drawing too is (altough modified) the Ise class drawing i've made nearly a year ago?

_________________
My Worklist
Sources and documentations are the most welcome.

-Koko Kyouwakoku (Republic of Koko)
-Koko's carrier-based aircrafts of WWII
-Koko Kaiun Yuso Kaisha - KoKaYu Line (Koko AU spinoff)
-Koko - Civil Aviation

Yes i used the upper structure of the ise class but the hull and other parts were taken either from part sheets or scratchbuilt

_________________
kike-92

Don't worry, what i meant is that you used an Ise class drawing and took the specifications of the Ise class, thus for me you did right.

_________________
My Worklist
Sources and documentations are the most welcome.

-Koko Kyouwakoku (Republic of Koko)
-Koko's carrier-based aircrafts of WWII
-Koko Kaiun Yuso Kaisha - KoKaYu Line (Koko AU spinoff)
-Koko - Civil Aviation

if your draft is 9 meters, it is actually almost spot on (gives an Cb of 0.6, that is similar to for example hood and agincourt)

_________________
Drawings are credited with J.Scholtens
I ask of you to prove me wrong. Not say I am wrong, but prove it, because then I will have learned something new.
Shipbucket Wiki admin

So that lives the specifications like this.

Displacement: 35,800 tons (standard); 40,200 tons (laden)
Length: 215.8 m
Beam: 31.75 m
Draught: 9 m
Speed: 25.3 knots (46.9 km/h)
Range: 7412km (4000nm) at 15 knots
Complement: 1,370

Armament:
12 × 15-inch
16 × 5.5-inch

I still dont know what type of propulsion i will use. I was thinking of this:

32,000 horsepower (24 MW)
geared turbines

I would like to hear some ideas if it isnt to much trouble.

_________________
kike-92

definitely increase your machinery's output, I'd stick to about 75-90/100,000 hp, 25 knots requires a bit of a jump in power from 23 knots

_________________
Work list(Current)
Miscellaneous|Victorian Colonial Navy|Murray Riverboats|Colony of Victoria AU|Project Sail-fixing SB's sail shortage
How to mentally pronounce my usernameRow-(as in a boat)Don-(as in the short form of Donald)Dough-(bread)
"Loitering on the High Seas" (Named after the good ship Rodondo)
There's no such thing as "nothing left to draw" If you can down 10 pints and draw, you're doing alright by my standards

_________________
kike-92

Good looking and balanced, I like it.

_________________

Nobody expects the Imperial Inquisition!