Shipbucket
http://67.205.157.234/forums/

Never Where British Hovercrafts
http://67.205.157.234/forums/viewtopic.php?f=13&t=8035		 Page 1 of 5
Author:  odysseus1980 [ October 31st, 2017, 7:36 pm ]
Post subject:  Never Where British Hovercrafts
Continued from here : viewtopic.php?f=17&t=7954

This is how far I am now for the BH.7 Mk 6 (according public illustrations).

[ img ]
Author:  odysseus1980 [ October 31st, 2017, 8:09 pm ]
Post subject:  Re: Never Where British Hovercrafts
With dummy missile boxes (not sure about shading)

[ img ]
Author:  heuhen [ October 31st, 2017, 8:13 pm ]
Post subject:  Re: Never Where British Hovercrafts
looks good, just make sure that you use black line for 90 degrees corner and dark gray for corners that are not 90 degrees. and shading for corners that are round and not sharp.

you can even try to do some shading on the 76mm gun and the egg
Author:  odysseus1980 [ October 31st, 2017, 8:30 pm ]
Post subject:  Re: Never Where British Hovercrafts
The "egg" is copied from the "Dutch Radars" designed by ace and the OTO Melara is from Parts Sheet. Also skirt needs some work, madmike posted a better source from an italian magazine.
Author:  acelanceloet [ October 31st, 2017, 8:47 pm ]
Post subject:  Re: Never Where British Hovercrafts
You can put shading on parts, however keep them consistent with the shading on the rest. right now, there is more shading on the egg then on the hovercraft :P

that said, I think the frame under the egg would look better with a 3 line frame instead of a 1 line, but try it out for yourself. The skirt is relatively soft, so use rounded lines, no hard corners. Choose a colour scheme for everything (parts, hovercraft, whatever) and stick to it. and I am not certain the WM is on the position it should be right now: the radar in the bottom half looks to be mostly blocked by the surface search radar on the pilothouse and the propulsion, should it not be slightly higher?
Author:  odysseus1980 [ October 31st, 2017, 9:10 pm ]
Post subject:  Re: Never Where British Hovercrafts
Actually the grey was taken from Bombhead's SR.N4 (old archives) and the skirt as well, modified for the shorter hull. DP drew an SR.N4 in civilian colors (Hoverspeed).

I too believe that frame under the egg needs improvements. Keep follow the thread, thanks for advice!
Author:  adenandy [ November 1st, 2017, 5:35 am ]
Post subject:  Re: Never Where British Hovercrafts
:o W O W :!: :!: :!:

EXCELLENT work Odysseus :shock:

Jolly WELL DONE my old fruit... Well Done indeed :D

Can't WAIT to see MORE please...... Much, MUCH more :!: :geek: :P
Author:  erik_t [ November 1st, 2017, 2:36 pm ]
Post subject:  Re: Never Where British Hovercrafts
These drawings look dimensionally sound, but they really need some color attention (I do recognize they're WIPs). Overall shading as well as black lines that might better be dark grays to illustrate the shape of the structure.
Author:  odysseus1980 [ November 1st, 2017, 4:13 pm ]
Post subject:  Re: Never Where British Hovercrafts
I found better sources in a book I bought (came to my hands today morning) and the drawning will be modified to corrent dimensions (above drawing is a bit too long).
Author:  odysseus1980 [ November 2nd, 2017, 8:24 am ]
Post subject:  Re: Never Where British Hovercrafts
According to Jane's 1985 Surface Skimmers, there were 2 variants of BH.7 Mk 20 with different hulls. Early was 13.8m wide (same with BH.7 Mk 4/ Mk 5), lengthened by 4.9m and the "Improved" which is 15.6m wide and 2.1m longer than previous. However, BH.7 Mk6 seem to be 33m long overall.
Page 1 of 5 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/