Moderator: Community Manager
[Post Reply] [*]  Page 1 of 1  [ 4 posts ] 
Author Message
Hood
Post subject: Baltic CorvettesPosted: January 7th, 2023, 10:55 am
Offline
Posts: 7233
Joined: July 31st, 2010, 10:07 am
In the early 1970s there was a push from several nations around the Baltic Sea to develop larger corvettes as flotilla leaders for their fleets of motor torpedo boats (which would soon also include fast attack craft armed with anti-ship missiles such as Exocet or Harpoon).

Germany
Following the cancellation of the Fregatte 70 programme in 1971, the Federal Republic of Germany's Bundesmarine wanted a 1,000 ton corvette armed with Exocets as a command ship for combined FAC/helicopter forces. This operating concept was later abandoned before it could be implemented. The drawing can be found here: viewtopic.php?f=13&t=10710

Denmark
In December 1972 the Danish Navy began the Korvet-72 (aka KV-72) project, a small corvette of 1,300 tons to replace the four Triton-class corvettes. In January 1973 Orlogsværftet completed the first sketch design, B.3. This had a standard displacement of 1,050 tons, full load displacement of 1,200 tons and overall length was 82m. Max speed was 20kt on diesels and 30kt on gas turbines with the possibility of achieving 32kt.
Design F.3 had a standard displacement 1,220 tons, full load displacement1,375 tons. The length was 90m, crew of 85. The further refined F.4 was completed in March, standard displacement was 1,175 tonnes, full load 1,325 tonnes. Overall length reduced to 85 m, crew increased to 90. F.5 was 5m longer, standard displacement 1,250 tons and full load 1,400 tons. Crew of 95.

During the summer 1973 the specifications were firmed up to 1,300 tons, 85m, 90 crew. Yarrow (Y-ARD) were then brought into the programme to refine the design which became the Niels Juel-class.

[ img ]
Drawing Note: the sketch design used for this drawing closely corresponds with the initial B.3 sketch design. It featured very generic launchers for the Harpoon (which in 1973 had not entered service) which looked a lot like those used by the Standard SSM variant. B.3 had a "75mm automatic gun" but its likely the 76mm OTO was intended from the start. The Sea Sparrow and AWS-5 radar are evident on the sketch design.

Sweden
By 1971 Sweden was also looking for a flotilla leader corvette of around 700 tons displacement which would also be capable of relieving the ageing destroyer fleet from escort duties. The design was around 75m long with two 57mm Bofors with a single-barrel Bofors 120mm A/S rocket mortar. Diesels and gas turbines would be fitted. Dubbed K1 and K2 the two vessels were not built at that time.
[ img ]

Work continued into the later 1970s, under the Ro 1 designation. The design evolved with newer model gun mounts, still including the single ASW mortar. An addition was two anti-ship missiles, at this time most probably the Rb11 SKA which was being developed for coastal defence use, a weapon in the Harpoon class. Work on this weapon was later abandoned and replaced by the RBS-15 which entered service in the early 1980s.
[ img ]
Drawing Note: this drawing is based on a plan of the Ro1 which featured a SAM armament replacing the aft 57mm gun, the mount matching Sea Cat which was about the only SAM then available for corvettes (although around 1977 Karlskrona were the first to offer a SAM-armed FAC when they proposed fitting Blowpipe to Spica-M for export customers). The drawing also seems to have four SSM cannisters, with two right aft replacing the depth-charge racks so I have done so here, quite likely it was a growth option. Note what seems to be a VDS mounting aft.

_________________
Hood's Worklist
English Electric Canberra FD
Interwar RN Capital Ships
Super-Darings
Never-Were British Aircraft


Top
[Profile] [Quote]
eswube
Post subject: Re: Baltic CorvettesPosted: January 7th, 2023, 4:45 pm
Offline
Posts: 10696
Joined: June 15th, 2011, 8:31 am
Excellent, very informative entry about project that were hardly well known. :)


Top
[Profile] [Quote]
Hood
Post subject: Re: Baltic CorvettesPosted: January 22nd, 2023, 3:43 pm
Offline
Posts: 7233
Joined: July 31st, 2010, 10:07 am
[ img ]
Project 666.2

A 1976 project from Poland, the Project 666.2 was a variant of the Project 666 'Czerwonak' large submarine chaser project to demonstrate that a large missile boat could be developed on the same hull.

The 666.2 had dimensions of 59,25 x 9,8 x 2,48m, and a normal displacement of 605 tonnes. Power was provided by 6x 4,000hp M504 6 diesels M504 for a max speed of 39.5kt and a range of 850nm @30kt). Complement was 48. Armament was; 4x P-20 SSMs, 2x2 Striela-1M, 8x MANPADS Strela-2M, 2x2 57mm AK-725 and 2x2 AK230. Radars included MR-302 and SRN-823.

With thanks to eswube for providing accurate data.

_________________
Hood's Worklist
English Electric Canberra FD
Interwar RN Capital Ships
Super-Darings
Never-Were British Aircraft


Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Baltic CorvettesPosted: January 23rd, 2023, 9:43 am
Offline
User avatar
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact: Website
Did not knew about these designs.

I have however some info about the Rb11 SKA missile :

https://www.secretprojects.co.uk/thread ... asm.39453/


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 4 posts ]  Return to “Never-Built Designs”

Jump to: 

Who is online

Users browsing this forum: No registered users and 9 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]