Shipbucket
http://67.205.157.234/forums/

Philippine Navy
http://67.205.157.234/forums/viewtopic.php?f=12&t=9534		 Page 1 of 3
Author:  Dutch [ April 6th, 2019, 10:47 am ]
Post subject:  Philippine Navy
I am currently focusing on creating scaled drawing of ships of the Philippine Navy. With that, I have created this thread to compile the drawings I already completed and planning to draw in the future.


Philippine Navy

[ img ]

Filipino: Hukbong Dagat ng Pilipinas
BRP: "Barko ng Republika ng Pilipinas" (Ship of the Republic of the Philippines)


Jose Rizal Class Frigate

The Jose Rizal Class Frigate is a class of two modern frigates being built for the Philippine Navy. The frigate design (officially known as HDF-2600) is derived from Hyundai Heavy Industries' HDF-3000 frigate design.

General Characteristics
Displacement: 2,600 tons at full load
Length: 107.5 m
Beam: 13.8 m
Depth: 6.9 m (at main deck)
Draft: 3.65 m
Propulsion: Combined diesel and gas (CODAD) arrangement
4× MTU-STX 12V1163 TB93, 5,773 bhp (4,305 kW) each
2× shaft lines
2× controllable-pitch propellers (CPP)
Speed: 25 knots (46.3 km/h)
Range: 4,500 nautical miles (8,330 km)
Provisions Endurance: 30 days
Crew: 65 organic + 25 non-organic


[ img ]

Modifications/Change Log:
1. Version 2.0 with changes discussed in this link.
Author:  admiral_snow [ April 14th, 2019, 1:11 am ]
Post subject:  Re: Philippine Navy
Nice! It's glad to see our future PN frigates in SB! :D

One comment though, the FCR should not be a Thales STING 1.2, but a Leonardo NA-25X.

Also, it would be nice to see these frigates drawn in the original configuration as proposed by HHI, before the frigate fiasco that "downgraded" the ships sub systems.
Author:  reytuerto [ April 14th, 2019, 4:38 am ]
Post subject:  Re: Philippine Navy
Hi, Dutch! Welcome to the bucket!
Nice effort with the future Phillipines Navy future frigate. Only one comment: The SSM goes horizontal, rather than vertical. Cheers.
Author:  Dutch [ May 15th, 2019, 2:22 pm ]
Post subject:  Re: Philippine Navy
Thank you guys for your feedback! I will consider these in my next post for this ship.
Author:  Dutch [ May 15th, 2019, 2:29 pm ]
Post subject:  Re: Philippine Navy
Gregorio del Pilar Class Offshore Patrol Vessel
The Gregorio del Pilar-class is a class of three ocean-going patrol vessels currently in service with the Philippine Navy.

General Characteristics
Displacement: 3,250 tons
Length: 115.4 m (378 ft. 6 in.)
Beam: 13.0 m (42 ft. 8 in.)
Draft: 4.6 m (15 ft.)
Propulsion: Combined diesel or gas (CODOG) arrangement
2× Pratt & Whitney FT4A-6 Gas Turbines, 18,000 shp (13,400 kW) each
2× Fairbanks-Morse 38TD8-1/8 12-cylinder diesel engines, 3,500 bhp (2,610 kW) each
2× shaft lines
2× controllable-pitch propellers (CPP)
Speed: 29 knots (53.7 km/h)
Range: 14,000 nautical miles (25,900 km)
Provisions Endurance: 45 days

BRP Gregorio del Pilar (PS-15)
Commissioned: 14 December 2011
[ img ]

BRP Ramon Alcaraz (PS-16)
Commissioned: 22 November 2013
[ img ]

BRP Andres Bonifacio (PS-17)
Commissioned: 21 July 2016
[ img ]


Modifications:
1. Minor updates to all 3 ships
Author:  admiral_snow [ May 24th, 2019, 1:27 am ]
Post subject:  Re: Philippine Navy
Beautiful!
Author:  Hood [ May 24th, 2019, 7:31 am ]
Post subject:  Re: Philippine Navy
Very nice work.

One tip I would give is that your overhang shading is two-shades but still quite faint. I would use a darker grey, 1x1 line for shallow overhangs and 2x2 thickness for the deeper overhangs on the main deck for examiner.
Author:  eswube [ May 26th, 2019, 5:18 pm ]
Post subject:  Re: Philippine Navy
Nice work.
Author:  barbz2019 [ June 5th, 2019, 3:41 pm ]
Post subject:  Re: Philippine Navy
it is also good if you build andrada class patrol crafts.
Author:  Dutch [ August 27th, 2019, 2:39 pm ]
Post subject:  Re: Philippine Navy
Will take note of these. Thanks!
Page 1 of 3 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/