Shipbucket
http://67.205.157.234/forums/

OPV P840 Holland
http://67.205.157.234/forums/viewtopic.php?f=12&t=1558
Page 1 of 2

Author:  acelanceloet [ July 19th, 2011, 5:11 pm ]
Post subject:  OPV P840 Holland

[ img ]
well, after the last fight with mitch we decided we would make the holland toghether. in the end, this never came of the ground, but I had an WIP of it. now the real ship is nearing completion (only some small details and the mast need to be added there, she's in her trials) I thought it would be best to make an perfect representation of her.

this is the first WIP of the ship. the entire ship will have the same level of details as the crane has right now. there are a lot of parts still missing, like the MOB boat, lights, railings, lifebuoys etc.

I am only battling with the credits. of the original drawing, very few remains. mostly the outlines of the hull and the underwater hull. apart from that, some parts of the bridge, the I-mast, the platform with the 76 on it.... and that's it.
so, I'd like your opinions on how to do the credits. if needed, I will keep them all (of course) but it might be that for example miho has done the base and vossiej the underwater hull or something, so it might be best to credit only those 2.

if you don't see the difference: this is the old one :P
[ img ]

any comments?

Author:  Vossiej [ July 19th, 2011, 8:46 pm ]
Post subject:  Re: OPV P840 Holland

Yeah those black lines that run horizontally in the superstructure look out of place. There is no kind of any transition in the hull there, just a different angle.

Author:  acelanceloet [ July 19th, 2011, 8:47 pm ]
Post subject:  Re: OPV P840 Holland

there is an small edge there, no different angle at all. but I will relook at those, but when I drew them (months ago, I stopped working on this back then due to my quarrel with mitch) so I might have made a mistake at those. any other comments?

Author:  Vossiej [ July 19th, 2011, 8:49 pm ]
Post subject:  Re: OPV P840 Holland

Some navigation radars on top of the bridge perhaps?

Author:  acelanceloet [ July 19th, 2011, 8:50 pm ]
Post subject:  Re: OPV P840 Holland

what does WIP mean :P
I am not halfway finished, and I will only finish it entirely when the real one has received it's mast.

EDIT: ow and: on this picture you can see that small line that I drew in black ;)
http://www.denhelderactueel.nl/wp-conte ... dd6fce.jpg
I know it is the other side, but now you see what I mean with it.... should I draw it different?

Author:  Vossiej [ July 19th, 2011, 8:51 pm ]
Post subject:  Re: OPV P840 Holland

OK, well nothing more to comment than until its finished ;)

Author:  acelanceloet [ July 19th, 2011, 8:54 pm ]
Post subject:  Re: OPV P840 Holland

vossiej, what do you think about the credits question?

Author:  Gollevainen [ July 19th, 2011, 9:29 pm ]
Post subject:  Re: OPV P840 Holland

Every artist is to be credited. If the undwaterhull and hull outlines remains from the old drawing, they need to be credited.
There shouldn't be ANY proplem with this sort of matters, all of you have been in the bucket long enough to realise this.

let this also be the last time I have to remind of basic things like these

Author:  acelanceloet [ July 19th, 2011, 9:34 pm ]
Post subject:  Re: OPV P840 Holland

gollevainen, do I need to credit artists of which the parts they drew have been removed/redrawn? that was my question, sorry if I am not clear on that. sorry if these are stupid questions, but ok, I shall keep every author on it (as I have done now, I thought so but was not certain)

Author:  Gollevainen [ July 20th, 2011, 7:14 am ]
Post subject:  Re: OPV P840 Holland

You credit the arists from who's drawing you have altered. Usually we won't go down to details and seperate whom drew what in the older version and whom can be dropped becouse his part was redrawn. Per se to try to redrawn a ship only to get rid of someone's spesific credit alltogether is bit nasty, juvenile and against all the gentleman's principles that Shipbucket is supposed to be.

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/