Shipbucket http://67.205.157.234/forums/ |
|
MS Intti http://67.205.157.234/forums/viewtopic.php?f=12&t=1453 |
Page 1 of 2 |
Author: | sebu [ June 28th, 2011, 4:35 pm ] |
Post subject: | MS Intti |
Here is my first real design She is 109 years old Lady and still running; with diesel though. |
Author: | Carnac [ June 28th, 2011, 4:37 pm ] |
Post subject: | Re: MS Intti |
The hull could use a bit more shading, I'm not sure if I see any at all |
Author: | acelanceloet [ June 28th, 2011, 4:39 pm ] |
Post subject: | Re: MS Intti |
nice, a few comments though: where exactly is the main deck? seeing from your railing, it is on the black lines, but the 'gap' in the bulwark and the positions of a door and the scuttles seem to show it lower also, the hull shading isn't entirely correct. following sb? yes, but it does not show the hull correclty, if I'm correct. the widest point of the hull should not be the point you have your prop, so somewhere the hull should shape towards a skeg or something. |
Author: | Thiel [ June 28th, 2011, 4:43 pm ] | |
Post subject: | Re: MS Intti | |
nice, a few comments though:
That would be because the deck is raised from the deckhouse and aft.
where exactly is the main deck? seeing from your railing, it is on the black lines, but the 'gap' in the bulwark and the positions of a door and the scuttles seem to show it lower |
Author: | acelanceloet [ June 28th, 2011, 4:48 pm ] |
Post subject: | Re: MS Intti |
possibly, but the scuttles don't raise and the door of the bridge seems to be lower as well... not matching up with the railing. hence why I am a bit puzzled. |
Author: | Thiel [ June 28th, 2011, 5:02 pm ] |
Post subject: | Re: MS Intti |
According to this picture the scuttles under the deckhouse isn't scuttles after all, but proper windows, and they are mounted higher. |
Author: | acelanceloet [ June 28th, 2011, 5:03 pm ] |
Post subject: | Re: MS Intti |
that explains it.... now he should show it. |
Author: | Thiel [ June 28th, 2011, 5:05 pm ] |
Post subject: | Re: MS Intti |
This picture shows it even more clearly. |
Author: | sebu [ June 28th, 2011, 6:18 pm ] |
Post subject: | Re: MS Intti |
Thanks for comments gents. A little update...better? |
Author: | Thiel [ June 28th, 2011, 6:39 pm ] |
Post subject: | Re: MS Intti |
If the drawing I posted is to be believed, then the underwater hull should be either black or very dark grey. |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |